Flexible pipe connector

Flexible pipe connectors serve for the improvement of flow characteristic behaviour and consist completely of high-quality stainless steel. The exactly co-ordinated component parts enable maximum service life, even with extreme temperatures. Even a guarantee of 3 years is granted by the improved quality of the HJS-interFLEX.

Illustration see below “HJS-interFLEX”
further illustrations with associated texts:

Normal smooth wall flow with interFLEX (with in-liner)

Low turbulence = Low-back pressure (only 1.6 mbar pressure loss with full engine load)

Accumulating turbulence through the open shafts of the flexible pipe (without inliners)

Large turbulence = Large back pressure

(here 8 mbar pressure loss with full engine load)

Frequent damage in case of inner braid:

Constriction of braided hose after break of the wires in the inlet area

Advantages:

Reduction of maximum loads in vibration behaviour
Avoidance of noise generation through consideration of
vehicle-specific conditions